Have you already thought about taking the driving road test, but you are afraid of not passing it? Don’t worry, we know it’s one of the most important days of your life, that’s why we want to help you pass the test with confidence and with the tips we will give you in this article.
The Department of Motor Vehicles (DMV) requires a test road to be able to drive. The test is divided into two parts: written, where the different rules and regulations for vehicles and traffic are evaluated by means of a multiple-choice test. After the written test, it is time to demonstrate your driving skills in the practical test (road test).
Review prior to the road test
Before taking the road test, the DMV examiner will check if you meet the vehicle requirements, that is, he or she will check if the interior controls of the vehicle are in driving condition.
Among these controls, the DMV examiner will ask you to perform the following movements:
- Start the car without starting it.
- Turn on the headlights.
- Turn on the left and right turns.
- Turn on the hazard lights in the morning.
- Turning off the headlights.
- Turn on the windshield wipers.
What questions can the examiner ask at this stage?
The DMV examiner will ask you some questions while you are taking the road test. Let’s look at some examples below:
- Suppose you go out driving in the morning, with a frost on the front window, now how do you defrost the front window? In this case, you should use the defrost option, turn on fan number 2, or higher, and select the “Heat” option.
- Where are the defrosters located?
- Next, you will be asked to disengage the emergency parking brake, and then you will need to engage it to demonstrate that you can do so.
- Finally, the DMV examiner will ask you to honk your horn, to verify that everything is under control, and that your vehicle is roadworthy.
Tips for passing the road test
From DMVgo.net we offer you some recommendations and tips so that you can pass the road test with flying colors. Pay attention to the following tips, which will be very useful for you to be able to pass the test.
Mirrors, steering wheel and seat belts
The first thing you should check before leaving the parking lot to the road, are the mirrors, which you should move until it is in your position, to have a good field of vision.
Then, you must adjust the steering wheel so that it is at your height and, of course, you will have to fasten your seat belt, something that you must not only do in the road test, but it is one of the first things you have to do as soon as you get into the car.
It is very important that, when changing lanes, you first look over your shoulders in the rear-view mirrors to check that no other vehicle is coming, so that you can leave the parking lot without any inconvenience or danger.
Each time you change lanes, you should move the turn signal to signal that you are about to change lanes.
FACT: It doesn’t matter if there is no vehicle coming, you must signal that you are changing lanes every time you change lanes.
Multiple lane change
This part will be carried out if you are traveling on a multi-lane road. Suppose there is a road with 4 lanes. To move to a new lane, you will have to pause. Then, put on your turn signal and look in both mirrors (always over your shoulder).
When you are ready to change lanes, move to the next lane, stop and, after double-checking that you have the green light to move to the other lane, you may do so. Do this process every time you need to change lanes.
WARNING: If you cross directly from lane 1 to lane 4, the examiner will fail your test.
Road with high-speed limit
The first thing you should do is to keep in mind that the examiner will not be upset if you take your time to perform these maneuvers, since it is better to wait than to do everything in a hurry, which can lead you to fail the exam.
Now, if you are driving on a street with a high-speed limit and you pass a car that is going very fast, you must respect the 3 seconds space, otherwise, you will lose points.
All you have to do is wait until it is safe and you have enough space to make the maneuver.
Go in the middle of the lane
If you are a beginner driver, it is normal to be afraid, so we recommend a visualization technique. Yes, as you read, this consists of looking ahead in the lane and imagining where the center of the road will be.
Then draw an imaginary line down the center of the lane and imagine that you are driving down the middle of this line, which divides the vehicle exactly in half. In this way, you will be able to pass this fundamental part of the road test by staying in the center of the lane in which you are driving.
Stop sign or traffic light
When you come to a stop sign or red light, you must stop before the white line where pedestrians pass. When braking, you must see the white line in front of the hood of your vehicle.
Right and left turns
To make a blind turn, you must move slightly away to see if a vehicle is coming. If you have a clear path, then turn right or left. Remember the 3-second distance between your car and those in front and behind you.
Remind that the higher the speed limit, the greater the following distance between vehicles. This will prevent possible collisions in case the vehicle in front suddenly brakes, since, thanks to the distance, you will have the necessary time to stop.
Position 9 and 3
When we talk about position 9 and 3. The correct position of the hands is compared to the hands of the clock, that is why one hand should be at 9 o’clock and the other at 3 o’clock.
IMPORTANT: If you drive with only one hand at 12 o’clock (middle), you will not pass the test.
Tips for braking on the road
If you are forced to brake suddenly and there is a vehicle behind you, a collision could occur, so you should react quickly and check your rear-view mirrors before braking to prevent the car behind you from colliding head-on with your car.
Eyes on the move and alert
It goes without saying that you should always be alert, so keep your eyes moving constantly. However, it is not superfluous to clarify that it is your duty to examine the road very carefully, paying attention to pedestrians, traffic signs, obstacles or turns, so you should constantly check the side and rear-view mirrors, to avoid possible accidents.
Do not cut the curves
People usually drive over the white or double yellow line. If you do this on your road test, you will be disqualified immediately. What you should do is take the curve wide and follow the traffic guidelines when making a left or right turn.
REMINDER: Do not cut any corners.
If you want to know more about the requirements for the exams, you can access the following links: written exam (theoretical), and practical exam. Depending on the state, you can check the DMV’s traffic laws and recommendations on their official website, for example, on the DMV California website.